We check and properly profile the playing surface of the frets and then make sure the fret ends are finished off properly. As part of delivering our services we may collect personal information about you as defined under the Privacy Act 1988 ( Privacy Act). This metal rod differs from guitar to guitar (some guitars such as classical guitars don't usually have a truss rod! Note: When coupling multiple B-7PSM systems, please turn on 1 set first, pair it, and then turn on the other sets sequentially.

The bridge affects the break angle and string height of your guitar and is also responsible for holding your saddles. Hold the power button of the TX and RX for more than 8 seconds, then it will enter to ID match status.

Caution: Do not put the in-ear buds in your ears before you start to adjust the volume, it may hurt your ears if the volume is too loud. This is the ideal tool for in-ear stage performance, and with a massive 30m (unobstructed) operation range and over 4 hours of battery life you can feel secure with your tone on any stage!

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.Enjoy precise audio reproduction thanks to the NUX B-7PSM's reliable low latency connection, 24-bit/40kHz high-fidelity sound, and 5. Where you leave a review of our Products, or if you tag us in any of your own material (including any social media post on your personal account) you grant us a non-exclusive, royalty-free, perpetual, irrevocable and fully sub-licensable right to use, reproduce, modify, adapt, publish, translate and create derivative works from, distribute and display such content through the world in any media. Audio fidelity is pristine with a broad and even frequency range and fast dynamic response, delivering the best possible sound quality to your earbuds or headphones. Note: For best results the TX should be at least 1 metre above the ground, 2 metres away from Wi-Fi routers and wall or metal surfaces to minimize reflections. Note: When coupling multiple B-7PSM systems, please turn on 1 set first, pair it, and then turn on the other sets sequentially.

In the event we provide linking services with third parties, you authorise us to undertake to provide details as necessary to that third party.

Cookies may enable automatic logins when you visit in the future and may enable content customisation. band Auto carrier detection and pairing Suitable for 16-32 Ohm earphones or headphones Supplied in a 3000mAh charging case SPECIFICATION: Batteries 3.