Artillery Sidewinder x1 3D Printer, Multi-function 3D Printer the latest 4th Version Artillery 3D Printer with Aluminum Extrusion Frame & AC Build Plate 3D Printer (300 x 300 x 400 mm)

Product Information

We noticed temperatures dropped as much as 10 degrees celsius when measuring from the center to the edge of the heated bed. The volcano hot end is capable of higher flow rates (because it can melt the plastic filament faster) meaning it can print fast if needed.

Exclusive Ultra-Quiet Stepper Driver - Dissipated much less heat and maintaining a higher torque comparing to other quiet stepper drivers available.Take a look at some of the models 3D printed with the Artillery Sidewinder X1 to see what it's capable of. Being flat means you don't need to use auto-leveling as is normally required with aluminum heated and non-heated beds due to non-level effects caused by manufacturing.

I’ve got a shelf mounted above mine with a multi-spool setup that’s a pretty easy print and uses standard thane bearings for the rollers. It should be noted that the bed heater in the Sidewinder X1 has 4 large dead zones around the level knobs. This will not happen with the Artillery 3D Printer as it has a filament runout detection sensor standard on the printer!We tested the z-layer alignment consistency of the Sidewinder X1 by printing an extremely long 370mm tall tube. The printer is very well packed, and partially assembled, you don’t need to be a great handyman to assemble this kind of machine, a few screws to assemble the chassis, a few cables to connect and your 3D printer will be ready to work in just 20min ! It’s a pity that the ultrabase tray is glued, it will be difficult to replace it, I think it will be better to use another tray on top to avoid damaging it, it’s much more practical to have a removable tray to remove the prints more easily.

Once more thing that whoever is making this Titan Aero knockoff has also messed up is the tension adjustment.

The transverse speed determines how 'fast' the print head can be moved from on print position to the next for multiple item printing. Despite some visual layering, such layer thickness lets you create well-detailed outputs with a quite decent surface finish. The Artillery Sidewinder X1 has a large build volume of 300mm (l) x 300mm (w) x 400mm (h), which allows it to print a large number of different objects.

When picking an Artillery Sidewinder X1, users should be aware of picking up their V4 version, which fixes most of the quality control issues found on Artillery’s earlier models.Artillery was among the first manufacturers to release a mostly assembled 3D printer and boasted of its quick assembling time.