Rycal Block Paving and Concrete Sealer 20Ltr

Product Information

It can last for up to four years and really brings out the colour in weathered paving, especially black limestone.

The product cost less than some of the other products I had looked at and it was easy to apply and after the second application the drive looks fantastic and is already being admired by my neighbours. Approximately 5m2 – 8m2 per litre as the jointing material does not need solidifying – it is generally less porous.They have all the qualities as other sealers but there is no harmful evaporating fumes once applied. If you are looking for a more wet look finish our sealer for block paving in the gloss finish is the right product for you. If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. This is a rough estimate and varies depending on the condition of the driveway and amount applied with each coat.

For more technical information on our products for sealing block paving, please refer to the additional information available with each product. Multicrete Products Block Paving Sealer High Gloss is a high quality Acrylic solvent based clear sealer, designed to enhance and protect Concrete Block Paved areas by repelling water, dirt, oil and fuels. If you want the sanded joints between the gaps in the paving to be set solid, then work on low coverage rates for the sealer of about 2 m2 per litre.The use of a squeegee during application will force the sealer deep into the sand between the blocks creating long term joint stability. All Smartseal sealers will do a great job protecting your driveway or patio and if a additional coat of sealer is applied every few years the paving can be kept in that 'just been laid' condition. Smartseal supplies sealers for block paving to help prevent weed growth and protect from oil stains. When preparing block paving prior to sealing it is important that not only is the surface of the pavers clean, but vital that the joints have been cleaned properly. I applied the sealer with a brush but found that using a cheap pressure sprayer was more effective and efficient.

The sealer will be tack free within 2 hours at 20°C and foot traffic may be permitted after 4 hours. If the pavers have a sanded joint you should liberally apply the sealer into the sand to solidify it. Water based block paving sealers are the perfect choice if you don’t want to apply a solvent based product. An annual treatment of the paving with fungicidal wash and gentle power washing is recommended in most cases. Having no way of using a pressure washer, I scrubbed down them twice using plain water with a squirt of Fairy liquid.

Multicrete Block Paving Sealer is a high quality acrylic solvent based clear sealer, designed to enhance and protect block paved areas by repelling water, dirt, oil and fuel. Any spillages of oil based products should be removed as soon as possible with oil remover to avoid any dry stains forming. New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging . Our block paving sealer- matt finish will initially leave the surface of the pavers with a mild sheen, but after a few months the sealant will weather to leave a virtually invisible seal on the surface.