Ideal 30-495 FT-45(TM) Feed-Thru Mod Plug Crimp Tool

Product Information

The Data T®-Cutter tool is a small and compact yet efficient hand actuated cable cutter with dual curved blades and a shearing cutting action which are recommended for cutting coax and other copper based low voltage cables. A patent pending mechanical design that requires only 1/3 to 1/2 the hand force of traditional tools to crimp the connector - no ratchet mechanism is needed and one handed crimping is possible.

The NEW FT-45 is a simple, compact and highly effective modular plug crimp tool for installers and techs that terminate RJ45 connectors regularly. The NEW FT-45™ is a simple, compact and highly effective modular plug crimp tool for installers and techs that terminate RJ-45 connectors regularly. PRACTICAL SOLUTION: This kit contains connectors and tool to terminate new cables or repair and replace broken connectors on existing cables. Fitted with a single universal crimp cavity for RJ-45 / 8-position connectors that can be used with Feed-Thru, standard, unshielded or shielded connectors for CAT5e, CAT6 or CAT6A.The IDEAL FT-45 Feed-Thru Mod Plug Crimp Tool is a simple, compact and highly effective crimp tool for installers and techs that terminates RJ45 connectors regularly. The FT-45™ is a simple, compact and highly effective modular plug crimp tool for installers and techs that terminate RJ-45 connectors regularly. We don’t share your credit card details with third-party sellers, and we don’t sell your information to others.

It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. The tool is compact, 5 1/2“ in length and weighs just over 1/2lb, about half the size and weight of bulkier traditional tools so it easily fits in your pocket and lightens the tool bag load. It was a more prevalent problem when they first came out, but it’s a problem that can rear its ugly head when the slicer on the tool starts to get dull. F-Gas (Fluorinated gases) government regulations specify that a limited number of products can be sold in the European Union that contain F-gases which have been linked to climate change. PRECISE TERMINATION: During crimping, the FT-45 crimp tool cleanly shears the excess conductors and leaves a smooth finish at the end face of the Feed-Thru connector.VERSATILITY: FT-45 is designed to crimp IDEAL Feed-Thru, standard and shielded RJ-45 connectors for CAT5e, CAT6 and CAT6A cables.

probably placed it on top of some surface, then, after completing work in a quality fashion, as I do, because I respect myself, or try to at least as much as possible, but you know how it is out there. Fitted with a single universal crimp cavity for RJ-45 / 8-position connectors that can be used with Feed-Thru, standard, or shielded connectors for CAT5e or CAT6. I have tried Ideal's as well as a knock off brand and the Klein has served me the best thus far, it seems to cut the wires the cleanest. The tool is compact, 14 cm / 5 1/2 in length and weighs just over 225 grammes / 1/2lb, about half the size and weight of bulkier traditional tools so it easily fits in your pocket and lightens the tool bag load. Instead of another traditional oversized, heavy, crimp tool style loaded with features that are rarely used or that just don't work well, we took this tool in a new direction.The feed through design is really cute - you can easily see if 2 wires were swapped going into the connector. The system is designed to simplify and improve the consistency of cable to connector termination of CAT5e and CAT6 modular plugs to twisted pair cables. The FT-45 modular crimp tool comes with a long-lasting heavy-duty cutting blade, providing over 2000 cuts. Ideal FT-45 Feed Thru system comprises of The Feed-Thru RJ45 Modular Plugs and FT-45™ Crimping Tool.

International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions. A simple compact and efficient RJ45 crimp tool suitable for terminating Feed-Thru FT-45 and industry standard RJ45 plugs.During crimping, the FT-45 cleanly shears the excess conductors and leaves a smooth, flat finish to the end face of the IDEAL Feed-Thru connector. During crimping, the FT-45 ™ cleanly shears the excess conductors and leaves a smooth, flat finish to the end face of the IDEAL Feed-Thru connector. el pelacables funciona, pero depende de la fuerza que hagas para que no llegue a tocar los hilos de los pares haciendo engorroso acostumbrarse.