Odi Elite Pro Lock-On Bike Grips

Product Information

Let’s see where the different patterns ended up. We decided to throw each pair on a different bike based off of which one would best suit each of the individual bikes in our stable. To put it shortly, no. It'll take a bit of experimenting to find the right size for you - but the effort will be well worth it for ultimate control and comfort. Though some grips are best chosen after taking particular hand measurements. The dual tread design is reminiscent of the DMR Deathgrip and works similarly well. The raised hard-ish end of the grip is a bit uncomfortable for riders who hang off the ends of their handlebars, however. The grip has a slight ergonomic shape reminiscent of the Ergon GE1, but I’ve fitted it both ways and not noticed any difference. Unlike the company’s Half Nelson and Love Handle grips, the Getta Grip also has a closed end, so you’re not going to plug bar with dirt in a crash, and it also conforms to most race rules. Finance is subject to application, financial circumstances and borrowing history. Performance Cycling Limited FRN: 720557 trading as Tredz are authorised and regulated by the Financial Conduct Authority. We are a credit broker not a lender – credit is subject to status and affordability and is provided by Mitsubishi HC Capital UK PLC. Terms & Conditions Apply.

Generally speaking, smaller hands suit thinner grips. Fitting grips that are too fat or thin may result in you having achy hands, arm pump, or problems regulating your braking and reaching levers for shifting and dropper post-actuation.They are by no means cheap but if your regular mountain bike ride is on the roughest and toughest gravity trails that are causing you serious fatigue, they might be your fix. Lizard Skins claims that this grip is its most complex option combining a dual pattern with a soft compound rubber - all to provide riders with a comfortable grip of. Each grip shares the same overall design layout which proved to be effective. We appreciate the 3mm allen screw over the 2.5mm that the twin clamp systems typically use. It’s easier it get it snug enough and you’d have to be pretty meat fisted to round out the head on one. We had our fair share of minor crashes and managed to smash some layers of skin off of our pinky on a Redwood tree but the ends of the grips survived surprisingly well. There’s very little cushioning and we’ve noticed a lot more harshness on rough trails compared to the Burgtec Bartender grip that was on my bike previously.

It will also depend if you tend to ride with or without gloves, riders who regularly wear gloves tend to prefer smaller, less aggressive patterns. How do I know when I need to replace my grips? While a grip is a simple piece of kit, some factors should be considered when choosing the right ones for your steed. Construction material, grip pattern, ergonomics, how they fasten to the bar and size varies from grip to grip. Each type has its own benefits, here we will advise which grip is best suited to each discipline. The pivotal moment, however, came in Pila, Italy after riding an XL Specialized Demo 8 downhill bike. With 20-minute long descents, Pila offers the type of riding that will leave even the toughest hands in tatters and your forearms pumped for days. It absolutely smokes brakes too. This grip is all about the rubber. Everything else about the grip is pretty mediocre to be honest. Two-collar design is outdated and rightly disliked by riders who ride with their hands slightly overhanging the ends of the handlebar. The RevGrips are available in three sizes spanning 31-34mm diameters and come in a range of colours – there are eight for the clamps and five for the sleeves, allowing a good level of customisation.The Elite Pro grips were developed in conjunction with Curtis Keene, an enduro world series racer. But before you think that these are ‘Enduro specific’ (at least they’re not e-MTB specific…) these grips have been designed for anyone who wants extra grip and padding, but isn’t fussed about a little bit of extra weight. Keep reading to learn more or skip to the bottom for answers to the most frequently asked questions about what to look for when buying a set of the best MTB grips. The Reflex grips are being offered in a roomy 135mm grip length and with two diameters: Regular (33.5mm) or X-Large (34.5mm). Combined with the available 9 color options – they are sure to be a perfect fit for your ride. This type of grip has a collar that can be tightened around the handlebar, usually with a small bolt. This means you can fit them easily, take them off again to access other handlebar hardware and they won’t come loose, no matter hard to twist or how bad the conditions get. The Oxford Driver grips tip the scales at 100g and come in fives colours, so you can have them match your bike if you so wish.

Another feature of these grips is the inboard flange, which I think is a love/hate thing. You may find it annoying and in-the-way, or you find it useful on hectic downhills where the flange helps your hands locate the grips when you’re bouncing around like a balloon in a hurricane. Personally it doesn’t affect me, as I cycle with my hands at the very edges of the grips so the flange isn’t anywhere near my hand, which brings me to my next point… Must have slipped on the take off to get such an #EnduroTurnbar™The Reflex grip is made in two sizes: the regular model with a 33.5mm diameter, which I’ve tested here and a larger 34.5mm XL version. There’s a range of colour choices, but no super-soft compound option or flanged model. The very simple nature of traditional slide-on grips means that they can be the cheapest option and are offered in thin sizes and comparatively light. The downside is they can slip unless they are tightly secured or if they get moisture underneath them. The cheaper options also don't offer the most grip, but they might last significantly longer. I normally use a set of DMR Deathgrips in the hard compound option, but have been wanting to try out a grip with a dual sided waffle pattern to seek out a little more cushioning. With the ODI Elite Pro grips, I certainly haven’t been disappointed. They fit my hands perfectly, and those 12 small boxes add an unexpected amount of padding and dampening to trail buzz. This is welcome for me, as I tend to ride without gloves, except for in the absolute coldest of conditions. Despite riding gloveless though, I can say that on hot summer days with sweaty hands, I’ve still had a load of traction and haven’t been concerned about my hand slipping off – something that I have experienced with some other smaller and less textured grips. Reflex grips are the latest innovation in impact damping to keep you riding longer and farther as they’ve been specifically engineered to reduce vibration. Like having suspension for your hands without compromising control.