Cisco SFP-10G-SR= SFP-10G-SR Network Media Converter

Product Information

Cisco VIC 15428: Recommended UCSM release and IMM release is 4.2(2) or later that contains VIC firmware 5.2(2) or later, and recommended standalone CIMC release is 4.2(2). Review note under Table 2 for minimum version required.

The Firepower 2130 and 2140 have a removable fan tray with 3 + 1 redundant fans that are hot-swappable. The fan tray is installedA SFP-10G-BXD-I device is always connected to a SFP-10G-BXU-I device with a single strand of standard SMF with an operating transmission range up to 10 km. Threat Defense and Cisco ASA software. See the Cisco Firepower Compatibility Guide and the Cisco ASA Compatibility guide, which If you have an inline interface set with a mix of hardware bypass and nonhardware bypass interfaces, you cannot enable hardware Hardware bypass is supported only on a fixed set of ports. You can pair Port 1 with Port 2, Port 3 with Port 4, but you cannot The Cisco 10GBASE-LR module supports a link length of 10 kilometers on standard Single-Mode Fiber (SMF) (G.652). SFP-10G-LR-S does not support FCoE.

Cisco Dual Fiber 4-Channel OADMs (part numbers DS-CWDMOADM4A= and DS-CWDMOADM4B=): This device allows you to add and drop four channels (with different wavelengths) onto one direction of anoptical ring. The other wavelengths are passed through the OADM. Dual fiber is used for both network andSFP connections. The four wavelengths are set to 1470, 1490, 1510, and 1530 nm for DS‑CWDMOADM4A=, and to 1550, 1570, 1590, and 1610 nm for DS-CWDMOADM4B=. All other products will be delivered via the fastest available method (excluding bank holidays and weekends) and generally within 3-5 days, depending on customer location. See Remove and Replace the Power Supply Module for the procedure for removing and replacing the power supply module in the Firepower 2130 and 2140. UCS VIC 15000 bridge connector for VIC 15420 mLOM and VIC 15422 mezz in an X210c-M7 and X410c-M7 Compute Node You can fit four copper SFPs in either the top row of ports or the bottom row of ports. Both rows cannot be populated at the

Dimensions (H x W x D): 8.5 x 13.4 x 56.5mm. Cisco SFP+ connectors typically weigh 75 grams or less. Hard drive retention: Hard drive retention is not available on models with a soldered hard drive, including XPS 9315 2in1, Chromebooks or Venue tablets, except the Venue 11 Pro. Note: Up to eight 2-Gbps DWDM SFP modules are supported in a single Cisco MDS 9000 Series switching module. Refer to https://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6576/product_data_sheet0900aecd80582763.html for details. is in the OFF position, the system powers off after shutdown is completed. Do not remove the AC or DC power source while this

Using customer use data, Cisco has identified and selected particular high-use wavelengths and will maintain shorter lead times on these items. The short-lead-time 4-Gbps DWDM SFP modules are from 1546.1 to 1560.6 with a 4-skip-1 approach. These part numbers are identified in Table 68. Table 69 identifies the rest of the 4-Gbps DWDM SFP modules. provides network connectivity when there are software or hardware failures. Hardware bypass is useful on ports where the Firepower stores threat detection results for use in future analysis. It supports the Advanced Malware Protection (AMP) software feature. The power supply module is rated at 15 A but the system power is limited to 6.1 A. See Hardware Specifications for more system specifications.

Results

The Firepower 2110 and 2120 have two SSD slots. These models ship with one 100-GB SSD installed in slot 1. The Firepower 2130