ATOMSTACK A5 Pro Laser Engraver, 40W Laser Engraving Cutting Machine Laser Cutter with Eye Protection Fixed-Focus, 5W-5.5W Output Power, Compressed Spot, Engraving Area 410x400mm

Product Information

The interval scale test is here to show if the laser focus spot shape is square or rectangular. The scanning interval is progressively increased from 0.1mm to 0.5mm. Import artwork in a variety of common vector graphic and image formats (including AI, PDF, SVG, DXF, PLT, PNG, JPG, GIF, BMP) Wide compatibility: The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAcs system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc. Below is the engraving of two sets of squares on the right side, one inside the other. The inner square is engraved with 1000mm/min and the inner square is at 100mm/min.

Integrated stepper motor and shaft: The machine uses an integral screw rod instead of a combined coupling. The stepping motor and the screw rod are integrated, which makes the laser movement more precise and the coupling more durable. All wood, bamboo, Paper, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective plating and lacquered metal Eye protection flame retardant filter panoramic glass: The flame retardant filter panoramic glass can filter 97% of ultraviolet light which is very good for your eyes. You and the people around you don't need to wear goggles and you can watch the laser engraving clearly. Reduce the cost of your goggles and the inconvenience of wearing goggles the glass is flame retardant and safer to use.Lightburn supports more formats: AI, SVG, DXF, PDF, HPGL, PLT, and RD for vector formats and PNG, JPEG, BMP, TIFF, TGA, and GIF for image formats.

Also the low hanging light shield is a bit annoying sometimes as it hangs a bit too low and it often hits the magnets I use for holding down the material. Participate in our online communities to access invaluable insights on laser engraving and cutting techniques. Engage with fellow enthusiasts, share your successes, and find solutions to any challenges you encounter. You can get millions of free vector designs on the internet, or you can use free vector drawing programs like Inkscape or QCAD (for more technical drawings)

The most importart part is again the interval scale. By scanning vertically and horizontally with different interval steps we can approximate the laser dot size. From the results we can see that the laser dot is a rectangular, approximately 0.1mm wide and 0.35mm high as with a bigger step, the lines are not touching any more. Asian Countries: Singapore, Malaysia, Japan, Thailand, Korea, Philippines, Vietnam, Indonesia and so on.