GODOX SK300II 300Ws GN58 5600K Studio Strobe Light Bowens Mount Monolight Flash with BD-04 Barn Door Color Filters Reflector Set

Product Information

It should work but I would not advise it. Using a radio trigger is far more reliable and allows you to control the power of the off camera flash from on the camera. It makes life a lot easier. There was a thread not very long ago by someone who has this strobe and he was having big problems with it overheating. Search the forum for SK300II and I'm sure that thread will turn up. To fire the flash without taking a picture, press the test button (4). It can also help adjust the flash brightness when combined with the select dial (14). Press the SET button and turn on the flash to view its version. Sync Triggering After 30 continuous flashes at full power, the flash should be cooled down for about 3 minutes. Overheating will occur if it is used continuously without cooling down.

GODOX SK300II Studio Flash Kit Head - Refurbished

In the smaller studio I simply add additional diffusion to the SK lights if I need less - so there is no reason to avoid going for more initially The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.If you are considering changing camera brand then it's not a good idea to buy a Nikon compatible TTL strobe if you intend to use it on camera. Synchronously press the Button and the Button can turn on the built-in wireless transmission and the < > is displayed. If there are other wireless flash systems nearby, you can change the channel IDs to prevent signal interference. The channel IDs of the master unit and the slave unit(s) must be set to the same. Setting the Communication Channel I have only on camera popup flash that Im using. Did you mean trigger TT600 by D600 popup flash? (See my question at bottom) When using a snoot, do not keep the modeling lamp on for a long time or fire too frequently (not over six times for one minute). Overheating will result in damages for strobe housing and/or studio light. Outstanding output stability, no more than 2% shifts when under the same ouput. Auto memory and recovery of adjusted panel settings.

GODOX SK-300II Studio Flash Head | Godox Official UK Distributor

disclaimer: I'm just an avid, self-taught amateur who shoots portraits and events so take everything with a grain of salt (ok, maybe a spoonful of salt) Although it is expected for its price tag, the Godox sk400ii also has a nice and professional feel to it where its build quality feels solid and the materials used to produce it feel professional to touch. The tripod attachment at the base of the light is very easy to use and the metal alloy used in the thread receiver is robust and will not cross thread helping to further extend the lifetime of your new light. Navigation Menu And Control System A modeling ligh's main purpose is to give you some idea of how the lights are going to illuminate the subject. For example where the shadows are going to fall. The fact that they can help focusing is secondary. For indoor shots Im usually on f/4 1/125 ISO1600, with on camera flash bounced to ceiling (Im not using continuous lights).

Short press the Modeling Lamp Button (5) to choose the modeling lamp's mode (OFF, PROP and percentage); and long press the Modeling Lamp Button (5) to switch on or off the function that the modeling is off when triggering the flash. on your advice, did just that after one session, can't/refused to put up with it now my sk400ii is effectively mothballed