Hi there, the water-based stain from Minwax is a bit different. You can have it mixed at the paint color to over 200 different colors (including Weathered Oak which is color code MW270). I reviewed the product materials for the Minwax water-based stain and didn’t seen any mention of the UV protection, so I doubt it. You could seal it with something that has UV protection though. Wood stains are made with pigments that soak into the wood’s surface to create color. This creates an extremely strong bond, making weathered stain one of the most long-lasting types of paint you can buy. If applied correctly, weathered wood stain can last for up to 30 years! How Do I Make Wood Look Grey Weathered? Befores, afters, mood boards, plans, failures, wins. We’ve done a lot of projects, and they’re all here. However, we found that staining the floors slightly darker, combined with balancing out the redness to achieve a more neutral light brown color, which fit our vision much better. Plus, the darker stain helped to hide dirt and wear-and-tear more effectively, making it a practical choice for high-traffic areas. Key factors to consider when choosing stain When looking for the best results from grey stain, oak is the most recommended wood. In doing that, you need darker grey stains to get perfect results on red oak. However, the stain may give blotchy results as these are closed porous species, and stains can’t find a way to settle in. You can use a pre-stain conditioner to help with this issue. Interior Grey Wood Stain

If you compare the oak stained with Weathered Oak to that just rubbed with walrus oil (pretty close to raw wood look), you can see that weathered oak slightly deepens the color of the wood and increases the contrast between the lightest and darkest parts of the wood grain.

Pages

Next, I flipped over the board and tried the Weathered Oak on the top and the Jacobean on the bottom of the board. If you apply multiple colors and let them sit on the surface for at least five minutes before wiping the excess, you will end up with a relatively dark hue. Weathered Oak: Top stain color is from Varathane on the bottom stain is from Minwax. It’s interesting the same stain name can result in a slightly different color. Varathane’s weathered oak from virus and has more of a warm hue, whereas weathered oak from Minwax skew more yellow. They both appress the red hue from red oak. Despite being dark, it is very transparent and still lets the grain of the wood fully appear. It settles really nicely into the lines of grain, making them extra dark. I wanted more control over the color and wanted the ability to sand and refinish down the road if we wanted or needed to!

This is a great first step to narrow down your choice without having to resand the floor, which can make it thinner and more difficult. Once you have a few strong contenders, you can test them on the actual floor. How I choose the stain for my red oak floor What do you think of our weathered wood, gray finish? I think it definitely gives off a rustic vibe and it’s perfect for how to make wood look old and gray or how to grey wash wood! It’s definitely one of the easiest ways to distress wood with paint!Weathered oak gives a worn and weathered look that would work for many different decor styles, including coastal, farmhouse, and even boho decor. Where to buy Minwax Weathered Oak Stain

Initially, I was surprised to find that our red oak floor looked so pink. Despite doing research on stain colors, when the floor company tested them on my floor, they looked different. This is because most of the online resource on stain color is based on white oak, not red oak. In fact, some stain colors can look really different between these two oak floors. First, apply pre-stain wood conditioner, letting it dry for at least 30 minutes. After that, apply golden oak gently over the wood using an old cloth dipped inside the stain. Ensure the stain does not spill. Let it dry for some time.After completing all the steps above, protect your newly created oak with a transparent film-forming topcoat. Remember that any topcoat with an amber tint will affect the final look, so it is best to buy a non-yellowing product like Minwax’s Polycrylic for this part. HI! I absolutely love this. I wanted to do this to our wall of shiplap in our front foyer. Will it work the same? If so, how long to you allow each stain to sit for before wiping? Or did you even have to do that? You will find several shades of oak-colored wood stain. For instance, the Weathered Oak oil-based wood stain and the Golden Oak Wood Finish oil-based wood stain do an excellent job on pinewood. To achieve that, ensure you apply generous amounts of the darker stain to cover the entire surface, then wipe the excess evenly along the grain. Step 6: Inspect the surface and apply a second coat if necessary The secret to staining pine to look like oak is mainly in selecting products to use on your wood. While some people prefer to start with a dye, we find that dying is not always necessary.

first, sand the wood and get rid of any remaining dust. I saw the difference clearly between sanding and not sanding since I forgot to sand for tests 1 and 2. Cant you tell?! Hopefully, I can help you if you’re feeling the same way trying to decide on a stain color for your next project. You don't have permission to access "http://www.homedepot.com/p/Varathane-1-qt-Weathered-Oak-Classic-Wood-Interior-Stain-339716/305502033" on this server.After the stain has dried fully according to the instructions on the product label, inspect it to see if you like the shade.