Ubiquiti UniFi 6 Pro Acces Point Wifi 6 AP 5.3Gbps 300+ clients (U6-PRO), dual band

Product Information

When everything is working properly, then the LED will be solid blue and, before it’s adopted to the UniFi controller, it will be solid white. What’s very problematic is that Ubiquiti has advertised that the users would be able to set the color that they wanted (RGB), but they have removed that feature. I have no idea why because as I said, the single LED pales in comparison to the traditional array of LEDs anyway. Why not have some fun? The throughput at 30 feet was 238Mbps up and 121Mbps downstream, but things get a bit problematic at 45 feet and farther. That because the attenuation shot up to 79dB and the throughput was barely decent, 43.9Mbps upstream and 12.7Mbps downstream. At 70 feet, I could no longer see the network, so it’s 0Mbps. Before reaching conclusions, I just assumed that it’s the fault of interference (which did ramp up after 30 feet) and it’s natural when using the 160MHz channel bandwidth on 5GHz. Please Note: The UAP-PRO is no longer available. For an alternative, we recommend the UAP-AC-PRO . Ubiquiti UniFi Pro Access Point (UAP-Pro) Virtual Ubiquiti Controller software interface (no expensive WiFi hardware controller/switch needed)

Before getting to the actual results, I need to mention that a PoE adapter or switch is mandatory, and I used the Zyxel XS1930 which was way overkill for a Gigabit connection, but I had it already installed from when I tested the EnGenius ECW336 (not that Ubiquiti actually sends me anything, let alone an Ethernet switch). So, as I did with the U6-LR, I used three client devices, one with a WiFi 6 adapter and two with WiFi 5 cards. Ubiquiti U6-Pro vs U6-Lr vs Zyxel WAX650S vs WAX630S – Long-term speed test – 80MHz – Upstream – 5 feet. The U6-Lite has an older 2.4 GHz radio, meaning it doesn’t deliver the benefits of Wi-Fi 6 for 2.4 GHz clients. The U6-Lite is an AX1500 class AP, with an 802.11n-era 2.4 GHz radio and a 5 GHz radio that tops out at 80 MHz channel width. The U6-Lite doesn’t support 160 MHz channels, unlike the U6-LR, Pro, and Mesh. They can all operate in DFS channels in the US, though. The U6 Mesh can be placed on a table, wall-mounted or ceiling-mounted, but the others are designed to be wall or ceiling mounted only. You can of course place the others on a table but coverage may suffer.The UniFi line is great but can be a bit confusing for beginners to understand. So I have put together this comparison of their latest Wi-Fi6 compatible access points – the U6 Lite vs. U6 Pro vs. U6 LR (LR = Long Range). When further away, you can see the impact of the lower transmit power for APs like the U6-Lite. Higher power and higher spatial stream APs offer more distance, and can compensate with features such as beamforming. Range is where the U6-LR and U6-Pro show their biggest advantage over the U6-Lite. Higher gain antennas and higher transmit power allow them to reach further. A few extra dBm is enough to allow an AP to effectively cover a larger area.

The UniFi Access Point (UAP) U6 family consists of 5 models: the U6 Lite, the U6 Pro, U6 Long-Range (LR for short), U6 Enterprise, and the U6 Mesh. Now how reliable that Wi-Fi is across the whole home and whether there are dead spots is another matter altogether. If your home is large or spread across multiple floors, a single Wi-Fi router is just not going to cut it. But your ISP-provided router comes with just 1 Wi-Fi radio. I have been using the UniFi U6 Lite in my home for many months now and have been impressed by how much it improved Wi-Fi in my home. Range is very good and so are transfer speeds. But how does it compare to the other U6 models? In-wall models are handy if you have Ethernet run to a wall plate. The three models I've tested aren't the best to compare because I don't have a AC-In-Wall-HD, or a Wi-Fi 5 model from Omada. Once again UniFi and Omada APs are generally the best value. The Instant On AP11D and AP17 are the worst value on a pure performance per dollar metric, but hopefully they'll be replaced with Wi-Fi 6 models soon. The difference between the U6-Lite and U6-LR is large enough that it could be the deciding factor between needing one or two APs to cover a given area. In some situations one U6-LR is better, in others two U6-Lites may be better. It’s hard to make general conclusions. There wouldn’t be much difference in performance or price, so that decision probably comes down to where you have Ethernet cabling more than anything. Note for International Readers

Unified Network Management

The U6-Pro is the newest of the three, and it is also a big step up from the U6-Lite. The U6-Pro also offers more transmit power, higher-gain antennas, more spatial streams, and more overall performance than the U6-Lite. The U6-LR and U6-Pro are both IP54-rated, meaning they are partially dust and splash resistant. They can be used in a protected outdoor area, like under a porch roof, but you wouldn’t want to install them in an unprotected outdoor area. Yes, all the UniFi 6 Access Points support mesh networking. Can I use the U6 Pro or U6 LR outdoors? The U6 Lite and U6 Mesh have comparable 2.4 GHz performance at various distances, but at 5 GHz the U6 Mesh is faster.